壁裝式可編程溫度控制器

CN1511 Series

Wall Mount Temperature Controller

查看下面所有型號

下單

Large, 7-Digit, 7-Segment LED Display 20 mm (0.8") H
Multiple Control Modes —On/Off, PID, Heat/Cool
10-Segment Ramp/Soak Program
5 Independent Ramp and Soak Programs
Programmable Control Parameters
Thermocouple, RTD, and Thermistor Temperature Inputs
Current, Voltage, and Millivolt Process Inputs
Scaling for Voltage, Current, and Millivolt Signals
4 Programmable Process Alarms (Optional)
Relay or Solid State Outputs (Optional)
Built-In Buzzer to Sound Alarm (Optional)
2 Programmable Timers (Optional)
Easy to View from a Distance
Protection from Dust and Moisture

溫度過程控制器和電源開關裝置 - 查看相關產品

產品描述

Housed in a wall-mount, watertight plastic enclosure, the CN1511 is a flexible temperature controller that offers the ease of an on/off controller with the precision of a full-blown PID controller. For applications that do not require the complexity of PID control, this device can be programmed to work as simple on/off controller. Yet for processes that require close temperature conformity, the CN1511 can be run under full PID control, selectable for either heating (direct acting) or cooling (reverse acting).

The CN1511 accepts 5 different ramp and soak programs, each with up to 10 segments. Separate pass-codes are required for selecting or entering a ramp/soak program. This prevents operators from making any inadvertent changes. The manual hold feature allows for an indefinite hold anywhere along the ramp/soak profile. Also offered is a manual setpoint entry mode for a quick ramp-to-setpoint function. This eliminates the need to enter a complete ramp/soak program.

Maximum and minimum temperature readings are continuously tracked, and 4 optional process alarms are available. These are programmable over the entire range of the selected input type. They can be configured as latching or non-latching, normally open, or normally closed. There are also 2 optional timers that work independently or in conjunction with process limits (e.g., turning on a fan 10 minutes after limit 1 temperature is reached). The time function keeps track of process run time.

The CN1511 also functions as a rate monitor, indicating instantaneous as well as average rate of temperature change. A programmable time base allows the rate to be displayed in per second, minute, hour, or any other interval. The CN1511 can also be programmed for a rate alarm, which can indicate whether a predetermined rate is exceeded or not achieved.

Additional features include a built-in buzzer that sounds whenever a limit is reached (available with the relay option). Visual indication of relay output status is given by LEDs on the front panel. The CN1511 also has a power line filter, designed to provide trouble-free operation in harsh industrial environments.

SPECIFICATIONS
Input Type:
. J, K, T, E, R, S, B, thermistor
2252 . @ 25°C (77°F), Pt100 RTD
. 0 to 10 Vdc
. 4 to 20 mA loop current
. 0 to 100 mV
CJC Error: ±0.5°C @10 to 45°C
(±0.9°F @ 50 to 113°F)
Accuracy:
Resolution: 1°C/°F for T/Cs and
RTDs; 0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
Voltage: 0.05% FS
Current: 0.05% FS
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/s (typical) Display:
Red 7-segment LED display,
20 mm (0.8") H
Display Test: 8.8.8.8.8.8.8. on power-up
Power Options:
120 Vac (60 Hz)—standard
220 Vac (50 Hz)—optional
15 Vdc @ 900 mA—optional
Scale:Programmable from 1 to 30000
Offset:
0.00 to 20.00 (current input),
0.000 to 10.000 (voltage input),
0.00 to 100.00 (millivolt input)
Rate: 0 to 500 seconds
Prop. Band: 0 to 100% of span
Reset: 0 to 50 repeats/min
On/Off Deadband (Programmable):
0 to full scale
Control Output: 5 Vdc drive @ 50 mA
max (internal 5 Vdc source) Output (Optional):
1. Open collector—6 open-collector
outputs, maximum sink capability
50 mA per output (internal source)
2. Relays—SPST; 1 A @ 28 Vdc
or 0.5 A @ 120 Vac resistive
Output Termination:
Euro-style pluggable connector
Rate: Variable, displayed as rate
change/time base
Enclosure Dimensions:
Case: 192 W x 160 H x 103 mm
(7.55 x 6.29 x 4.05")
Material:
Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Weight:1.4 kg (3 lb)

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)

產品編號產品描述

數量

產品描述

CN1511RTD-2

咨詢

貨期:

數量

Wall-mount temperature controller, RTD input, 8-15 Vdc

CN1511TH

咨詢

貨期:

數量

Wall-mount temperature controller, thermistor input

CN1511TC

￥5,200.73

貨期: 2 周

數量

Wall-mount temperature controller, thermocouple input

CN1511TC-2

咨詢

貨期:

數量

Wall-mount temperature controller, 8-15 Vdc

CN1511TC-4

￥6,673.01

貨期: 6 周

數量

Wall-mount temperature controller, thermocouple input, 6 open collector outputs

CN1511TC-3

咨詢

貨期:

數量

Wall-mount temperature controller, thermocouple input, 6 relay outputs

† 所有金額以RMB顯示
注: Comes with watertight connectors (2) and complete operator’s manual.

產品編號生成器

在此處生成您自己的產品編號

(1) (2) (3)

CN1511

重填

選項說明:

(1) Input Code 選項:
TC for J K T E Thermocouple input
RTD for Pt100 Ohm input
TH for Thermistor input
R for R Thermocuple input
S for S Thermocuple input
B for B Thermocuple input
P for 0 to 100 mV input
V for 0 to 10 Vdc inout
C for 4 to 20 mA

(2) Power Options 選項:
無（選項為空白） for Std 120 Vac
-1 for 240 Vac
-2 for 8 to 15 Vdc

(3) Output Options 選項:
無（選項為空白） for Std 5 Vdc drive @ 50 mA max
-3 for 6 relay outputs - 4 alarms 2 timers
-4 for 6 open-collector outputs 4 alarms - 2 timers
注: 并非所有組合都有效，請查閱規格表上的有效產品編號。