The HFP-100 series series has been discontinued. Please contact our flow dept. Engineering department.
The HPF-110/120 series are
compact, lightweight, self-contained
portable testers with laboratory
accuracy. Designed for fast
diagnostic troubleshooting of all
types of mobile or stationary
hydraulic systems and
components, makes all flow,
pressure and temperature measurements simultaneously from
one point. Helical type pressure
gauge provides pulsation
dampening and high over-pressure
capacity. Additional features
include pressure relief disc
protection, and low battery/overrange
indicators. Metric units also
available.
The HPF-100 series are all-digital,
compact, lightweight, self contained
portable hydraulic testers and
dynamometers. Designed for fast
diagnostic troubleshooting of all
types of hydraulic systems and
components, including engine-pump
combinations. Makes all flow,
pressure, temperature and power
measurements simultaneously from
one point, in either U.S. or metric units (switchable). Silicon strain
gauge pressure sensor. This series
also offers other standard features of
HFP-110/120 series. However, the
HFP-100 series is NOT CE rated.
SPECIFICATIONS Material Housing: 2024-T351 anodized aluminum Turbine Rotor: T416 stainless steel Rotor Supports: 6061-T6 aluminum Rotor Shaft: T303 stainless steel Seals: Buna standard; FKM and EPR optional Ball Bearings: 440 C stainless steel Hub Cones: 6061-T6 aluminum alloy Temperature Probe: 12L14 steel (zinc plate, dichromate finish) Valve Body for 15/30’s: Cold rolled steel; 60/85/200 Body: 12L14 Steel Stem: 303 stainless steel Poppet: 12L14 steel hardened Straightening Section: 15/30: CA360 brass 60/85/200: 6061-T6 aluminum Cones: 2024-T4 aluminum 200 GPM (757 LPM): Sleeve—D.O.M. steel tube Ports: SAE straight thread O-ring boss, female, J1926/1; BSPP ISO1179 Magnetic Pick-Up: Body: 12L14 steel, black oxide finish Nut: 12L14 steel, zinc plate, dichromate finish Performance Electrical Output Signal: Self-generating alternating pulse, 100 mV RMS (100 Hz) min Flow Accuracy: ±1% of full scale Repeatability: ±0.2% Turbine Response: <200 ms Fluid Temperature Range: -20 to 150°C (-4 to 300°F) Ambient Temperature Range: -20 to 55°C (-4 to 131°F) Flow Readout: Linearity and zero shift = ±1-digit Operating Pressure: Max 6000 psi (414 Bar, 41.4 MPa, 420 kg/cm2) Fluid Temperature: Max 150°C (300°F) Readout Accuracy: ±1-digit Battery Type: 2 "AA" size alkaline; life 50 hours Dimensions: HFP-111/121 thru HFP-114/124: 287 x 279 x 89 mm (11.3 x 11 x 3.5") HFP-115, HFP-125: 311 x 298 x 101 mm (12.3 x 11.8 x 4")
† 所有金額以RMB顯示 注: Comes complete with 2 "AA" alkaline batteries, and operator’s manual.
