The PHH-126 series has been discontinued. Please see the PHH-7000 as a possible alternative or contact our Flow Engineering department.
The 6-in-1 PHH-126 meter was designed
with a built-in rechargeable battery. The
built-in battery can last approximately
3 years, with standard charging time of
approximately 2 hours. The PHH-126 can
measure 4 parameters including pH (probe
sold separately), temperature, conductivity
and TDS. This multi-parameter water
quality monitor is a versatile instrument
with reliable multi-probe system which is
easy-to-use and easy-to-read. It features
simultaneous measurements of pH probe
(sold separately), temperature (°C or °F),
conductivity (EC or CF) or TDS with a
single push of a button. The PHH-126 is
economical and designed for both nontechnical
and technical personnel to use.Specifications Measure Range pH: 0.00 to 14.00 Temperature: -50 to 70°C (-58 to 158°F) CF: 0.0 to 199 EC: 0.00 to 19.99 mS/cm TDS: 10 to 19990 ppm Resolution pH: 0.01 Temperature: 0.1°C (0.2°F) TDS: 10 ppm EC: 0.01 CF: 0.1 Accuracy pH: ±0.01 Temperature: 1.0°C (2.0°F) EC, CF, TDS: ±2% FS Operating Temperature: 0 to 0.50°C (32 to 122oF) Automatic Temperature Compensation (ATC): 0 to 0.50°C (32 to 122oF) Power: Internal rechargeable battery with 120 Vac power adaptor/charger (included) Dimensions: 155 L x 86 W x 22 mm D (6.10 x 3.39 x 0.87") Weight: 223 g (7.9 oz)
† 所有金額以RMB顯示 注: Comes complete with built-in rechargeable battery, charge, AC power adaptor/charger, mini-screw driver and operator’s manual in a hard carrying case.
