Strain Gage Adhesives

TT300, SG496, SG401

Strain Gage Adhesives TT300 SG496 SG401

查看下面所有型號

下單

Two 1 oz Hardener Bottles (1/2 Filled)
Two Plastic Funnels (35 mm Dia.)
Two Brush Caps
One 2 oz Bottle of Acetone
One 2 oz Bottle of Acid Primer
One 2 oz Bottle of Neutralizer
One 2 oz Bottle of Resin Solvent
Operator’s Manual

應(yīng)變計, 配件和測量儀器 - 查看相關(guān)產(chǎn)品

產(chǎn)品描述

OMEGA’s TT300 cement is a heat-cured, 2-part epoxy adhesive that can be used to bond polyimide-backed strain gages for strain measurement up to 200°C (392°F). Each TT300 kit includes 2 bottles of resin and hardener that are pre-measured to ensure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for 1 minute.

A bottle each of hardener and resin produce approximately 3/4 oz of adhesive. The shelf life of the resin-hardener mixture is 6 weeks at room temperature. The shelf life of the unmixed components is indefinite, provided that the bottles are kept tightly sealed. Each TT300 kit includes 2 oz of acetone, acid primer, neutralizer, and rosin solvent for cleaning and preparing the surface, as well as 2 funnels and 2 cap brushes.

SG496 and SG401 are general purpose cold-curing, 1-part glues. They are the most commonly used adhesives for strain gages. They cure in 1 minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate, and SG496 is a methyl-based cyanoacrylate. They have a 1-year shelf life at room temperature, but shelf life may be longer at colder temperatures. The glue temperature range is -54 to 82°C (-65 to 180°F).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for products on this page. You will be contacted by Internet Sales to confirm after the order is placed.

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)